$89.00 $69.00


FeatherStone Heights STONE COTTAGE CAGE
  • Especially fun for children 
  • A world away from the boring wire cages you find
  • Extra pieces are available for purchase seperately

Move your bird into the full-featured home with the floor plan of his dreams. This delightful wire cage with decorative architectural accents includes a removable floor grill and drawer, two outside access cups, two perches for comfortable seating, large entryway door, and a rooftop access door.

Metal cage is finished in bird-safe enamel. Decorative accents are made of durable, bird-safe plastic.

Easy-clean design and materials means minimum maintenance. (READ CUSTOMER COMMENT: "I have one male parakeet, that just adores this wonderful, adorable cage. Everything is convenient and its so easy to clean! I'd recommend this for first time bird owners also, because in the back of the cage there is an even bigger door for easy-to-reach situations!")

Assembles in minutes. **See below. We sell several choices for inside furniture for this unique Bird Cage. You will find those under the Toy for all and then Tiny Bird Section.

   Cage Size       Bar Spacing     Bird Size Suggestion  
   16" wide x 16" deep x 21-1/2" high       5/8"     Sm Conures, Parakeets, Lovebirds, Lorikeets 

**Parts Included:

  • 1 steel base unit
  • 1 steel pull out tray
  • 1 wire grill flooring
  • 1 wire home body
  • 1 wire roof (4 sided)
  • 1 wire roof (flat w/4 prongs)
  • 1 chimney
  • 1 front door
  • 2 stone corners (right)
  • 2 stone corners (left)
  • 2 feeding cup windows
  • 2 perches with end caps
  • 2 feeding cups
  • 4 assembly screws
  1. Attach Wire Body Mesh to Base
  2. Attach cage body mesh to base unit, by raising the horizontal wire lock on the side of the cage. This will allow the positioning wires to be inserted into the elongated holes in the base. Once the positioning wires are in place on one side, secure by lowering the wire lock to rest comfortably. Repeat this for the other side of the cage. When complete, the wire body should be secure with the base, fitting into the eight guide holes, with the locks on the right/left in the locked (down) position.
  3. Attach Stone Corner Units to Cage Body
  4. Use the vertical tabs on the stone corner units to hug the double wires on the cage body. The other side of the corner unit is secured by pressing downward, and locking the L tabs into position. When secured properly, the corner unit will not move and will be further locked into position when the roof is attached. Please note that the position of the stone corner units are printed on the inside of each of the pieces (for example, "right rear" or "left rear").
  5. Attach Chimney to Cage
  6. Attach chimney to cage by locating the two screw holes in the side of the steel base unit, and temporarily lining them up with the holes in the bottom of the chimney. Attach the plastic chimney hook to the cage wire by rotating the chimney (do not force hook to pop between the wires). After chimney is in the correct position, secure with two screws provided.
  7. Attach Wire Roof To Cage Body
  8. Open large wire roof assembly and position on top of cage body. Roof will overhang cage body, and clip over the second wire. Engage all of the wire latches. The top door of the roof will be positioned to the left. Then, after the body of the roof is secure, lay the flat roof top into position with the wire ends facing up. Secure by engaging all of the over/under wire latches. Crimp wire attachments with pliers for maximum security, using a cloth to protect painted finish from scratching.
  9. Attach Feeder Cup Windows
  10. Attach windows (acting as feeder cup doors) by snapping them into the two wire openings on the front and side of the cage. When the feeding cups are in place, and the windows are in the closed position, the window will snug over the lip of the cup, creating a snug and secure fit.
  11. Attach Front Door
  12. Attach front door by inserting the bottom of the door slightly into the cage, at an angle, and resting the two guide wires inside the cage. At this point the door will be resting comfortably in the open position. Close door by raising the drawbridge door unit and hooking the top wires.
  13. Assemble & Attach Top Decorative Railing
  14. Assemble top decorative railing by snapping the four railing units together to make a square. Press the hook of one unit into the receptor of the next, with the solid side of the railing balls facing outward. When complete, place on top of the cage and secure by inserting onto prong wires.
  15. Insert Grill Flooring, Front Stairs & Perches
  16. Slide the wire grill floor into position, so it rests on the grill slide channels in the metal base unit. Attach end caps to perches and install where desired. Front stairs are attached to holes in pull-out drawer with screws.



Customers who bought this product also purchased
FeatherStone Heights TUDOR HOME CAGE
FeatherStone Heights TUDOR HOME CAGE
0 items
Manufacturer Info
Prevue Hendryx
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter